IEEE POWER SYSTEM PROJECTS

 IEEE POWER SYSTEM PROJECTS

 

IEEE POWER SYSTEM PROJECTS

• 48-Pulse GTO Interline Unified Power Flow Controller.
• A 24-pulse AC-DC converter employing a pulse doubling technique for vector-controlled induction motor drives
• A Control Methodology and Characterization of Dynamics for a Photovoltaic (PV) System Interfaced With a Distribution Network - 2009
• A Fast-Acting DC-Link Voltage Controller for Three-Phase DSTATCOM to Compensate AC and DC Loads - 2009



• A Fuzzy Rule-Based Approach for Islanding Detection in Distributed Generation
• A High Performance Induction Motor Drive System Using Fuzzy Logic Controller
• A High-Power-Factor Single-Stage Single-Switch Electronic Ballast for Compact Fluorescent Lamps
• A hybrid system based approach to Direct Torque Control (DTC) of induction motors
• A Modular Fuel Cell, Modular DC–DC Converter Concept for High Performance and Enhanced Reliability - 2009
• A new 84-pulse VSC configuration using multi-level DC voltage reinjection for especial applications
• A new simple control strategy for shunt active power filters under non ideal mains voltages - 2010
• A Novel Single-Phase Shunt Hybrid Power Filter Configuration for Power Quality Improvement - 2010
• A Novel Three-Phase to Five-Phase Transformation Using a Special Transformer Connection
• A Novel Three-Phase to Five-Phase Transformation Using a Special Transformer Connection - 2010
• A Power-Quality Index to Assess the Impact of Voltage Harmonic Distortions and Unbalance to Three-Phase Induction Motors
• A review of single-phase PFC topologies based on the boost converter - 2010
• A Single-Phase Voltage-Controlled Grid-Connected Photovoltaic System With Power Quality Conditioner Functionality - 2009
• A study of modeling and simulation for interleaved buck converter - 2010
• A switched inductor multilevel boost converter - 2010
• A switched-capacitor based embedded DC-DC buck converter for high power efficiency and high power density - 2010
• A Three-Phase Interleaved DC–DC Converter With Active Clamp for Fuel Cells
• An Analytic Model for Fault Diagnosis in Power Systems Considering Malfunctions of Protective Relays and Circuit Breakers
• An Inrush Mitigation Technique of Load Transformers for the Series Voltage Sag Compensator
• An Inrush Mitigation Technique of Load Transformers for the Series Voltage Sag Compensator - 2010
• An Online Simplified Rotor Resistance Estimator for Induction Motors
• ANN-Based SVC Switching at Distribution Level for Minimal-Injected Harmonics
• APF for harmonic voltage resonance suppression in distribution system


• Application of DSTATCOM for Mitigation of Voltage Sag for Motor Loads in Isolated Distribution systems.
• Control circuit for active power filter with an instantaneous reactive power control algorithm modification
• Control of parallel connected inverters in standalone ac supply systems
• Control of Wind Turbines with Induction Generators Interfaced to the Grid with Power Electronics Converters
• Control Scheme of Cascaded H-Bridge STATCOM Using Zero-Sequence Voltage and Negative- Sequence Current
• Control Techniques for Active Power Filters - 2010
• Derivation of boost-buck converter based high-efficiency robust PV inverter - 2010
• Design and Analysis of a Grid-Connected Photovoltaic Power System.
• Design and Implementation of a Current-Source Converter for Use in Industry Applications of D-STATCOM
• Design of a 28 V-to-300 V/12 kW Multicell Interleaved Flyback Converter Using Intercell Transformers
• Design of a hybrid PID plus fuzzy controller for speed control of induction motors
• Design of a Mode Decoupling STATCOM for Voltage Control of Wind-Driven Induction Generator Systems
• Design of controller for PMSM
• Design on Vector Control System of AC Motor for Hybrid Electric Vehicles
• Development of Hybrid Active Power Filter Based on the Adaptive Fuzzy Dividing Frequency-Control Method - 2009
• Dynamic DC-bus voltage control strategies for a three-phase high power shunt active power filter
• Dynamic Hysteresis Current Control to Minimize Switching for Three-Phase Four-Leg VSI Topology to Compensate Nonlinear Load
• Effects of Switching Asymmetry on an Isolated Full-Bridge Boost Converter
• Enhancement of power quality in distribution system using D-STATCOM
• Feasibility Study on Application of Voltage Source Inductive Filtering Converter in HVDC-Light Systems - 2010
• Flexible Power Electronic Transformer
• Flexible Power Electronic Transformer - 2010
• Harmonic elimination in single phase systems by means of a hybrid series active filter (HSAF)
• Harmonic Mitigation in AC–DC Converters for Vector Controlled Induction Motor Drives
• High-Efficiency Voltage Regulator for Rural Networks
• Hybrid Differential Evolution Particle Swarm Optimization Algorithm for Reactive Power Optimization - 2010
• Implementation and Control of an Hybrid Multilevel Converter with Floating DC-links for Current Waveform Improvement
• Implementation and Performance Evaluation of a Fast Dynamic Control Scheme for Capacitor-Supported Interline DVR
• Implementation of Single-Phase Shunt Active Power Filter under Non-sinusoidal Input Source - 2010
• Improved Fault-Location System for Railway Distribution System Using Superimposed Signal
• Indirect vector controlled induction Motor drive with fuzzy logic based intelligent Controller
• Input-Output Linearization and Robust Sliding-Mode Controller for the VSC-HVDC Transmission Link
• Instantaneous power control of D-STATCOM with consideration of power factor correction
• Inverse control of three-phase four-leg active power filter - 2010
• Investigation of Subsynchronous Resonance With VSC-Based HVDC Transmission Systems - 2009
• Isolated Buck-Boost DC/DC converter for PV grid-conPROJted system - 2010
• Loss Power Minimization Using Particle Swarm Optimization
• Maximum power point tracker for solar cells based on boost converter - 2010
• Model predictive control of Unified power quality conditioner with control saturation - 2009
• Modeling and Simulation of Dual-Mode DC/DC Buck Converter - 2010
• Multiband Hysteresis Modulation and Switching Characterization for Sliding-Mode-Controlled Cascaded Multilevel Inverter - 2010
• Multiconverter Unified Power-Quality Conditioning System: MC-UPQC - 2009
• Multi-level configurations for three-phase AC-DC 48V power supply - 2010
• Multilevel inverter modulation schemes of eliminate common mode voltages
• Neural Network Controller For Ups Applications
• Non Linear Control of STATCOM
• Nonisolated High Step-up Boost Converter Integrated With Sepic Converter - 2010
• Novel Direct Torque Control Based on Space Vector Modulation With Adaptive Stator Flux Observer for Induction Motors
• Operation and control of single phase micro-sources in a utility connected grid - 2009
• Optimal Capacitor Placement and Sizing in Unbalanced Distribution Systems With Harmonics Consideration Using Particle Swarm Optimization
• Optimal location and control of shunt FACTS for transmission of renewable energy in large power systems
• Optimized Modulation for AC–DC Harmonic Immunity in VSC HVDC Transmission
• PMSM speed sensorless direct torque control based on EKF - 2009
• Power system stability improvement using energy storage with fuzzy logic controller
• Power-Management Strategies for a Grid-Connected PV-FC Hybrid System
• Reduced Rating VSC With a Zig-Zag Transformer for Current Compensation in a Three-Phase Four-Wire Distribution System - 2009
• Reference Current Computation for Active Power Filters by Running DFT Techniques
• Reliability Evaluation of Bulk Power Systems Incorporating UPFC - 2010
• Research on three-level static synchronous compensator
• Shunt active filter for power quality improvement
• Simplified series active power filters - 2010
• Simulink implementation of induction machine model.
• Single inductor quad-input-dual-output buck converter for photovoltaic systems - 2010
• Single-Phase AC–AC Converter Based on Quasi-Z-Source Topology
• Single-Phase AC–AC Converter Based on Quasi-Z-Source Topology - 2010
• Single-phase hybrid active power filter using single switch parallel active filter and simple passive filter
• Single-phase two-stage boost rectifiers with sinusoidal input current - 2010
• Single-stage DC-AC converter for photovoltaic systems - 2010
• Study on control method of three-phase active power filters - 2010
• Synchronous reference frame based controllers applied to shunt active power filters in three-phase four-wire systems - 2010
• The design of controller of buck converter - 2010
• Torque ripple reduction in direct torque control of induction machines by use of all voltage vectors of matrix converters
• Transient stability control of TCSC - 2009
• UPQC signal detection algorithm based on PSO-Fuzzy - 2009
• Vector controlled PMSM drive based on fuzzy speed controller
• Wind Farm to Weak-Grid Connection using UPQC custom power device

Enoy:IEEE POWER SYSTEM PROJECTS